Always dampen brush or sponge thoroughly with Duncan Brush Cleaner and squeeze out excess before loading with Wax Resist.
Apply 1 good coat of Wax Resist over greenware, bisque, underglaze or glaze.
Allow Wax Resist to dry thoroughly before proceeding with technique.
Gently remove excess color from resist areas with a dampened sponge before firing.
Fire greenware to shelf cone 04.
Remove any loose particles of fired underglaze with stiff brush before glazing. Glaze fire to shelf cone 06.
Clean brush in Brush Cleaner and rinse in warm water immediately after use. Wipe rim of jar and inside of lid, then close tightly.
Tips and Techniques:
For underglaze designs, apply base coat of underglaze color to greenware. Paint design with Wax Resist over base coat. When design is thoroughly dry, apply contrasting color over the ware. Bisque fire to shelf cone 04. After bisque firing, remove loose underglaze particles with a stiff brush before glazing.
For glaze designs, paint designs with Wax Resist directly on shelf cone 04 bisque or over 3 coats of dry, unfired glaze applied to shelf cone 04 bisque. When Wax Resist is dry, apply 1 coat of a second glaze color over the ware. Fire to shelf cone 06.
